筛选条件
清除全部选项

类别
机座尺寸(mm)
相数
出轴类型
额定电流
步距角
步进角
静力矩(Nm)
额定电流(A)
减速比
出轴形式
刹车力矩(Nm)

        步进电机是一种直接将电脉冲转化为角度位置的机械装置,角度的大小取决于脉冲的数量,它和与其配套的步进电机驱动装置共同组成了一套控制简单,又低成本的开环系统。

        Stepping motors are highly precise, digitally controlled motors that are able to provide reliable position operation through electrical pulses. Together with the driver, it constitutes an open loop controlling system, which is of low cost and simple to construct.

特点 Features:

1、位置控制功能 Position Control

可预先发出具体的脉冲数量,从而得到需要输出的角度。

The specified number of pulses determines the output degree(s) generated.

2、无极调速功能 Linear Speed Selection

可根据发送脉冲的速度,得到需要的电机的转速。

The running speed is linearly variable and determined by the                     frequency of the pulses.

3、正/反,急停及锁定功能 Forward & Reverse, Pause and Holding                     Function

通过对系统的高低电平控制,得到正/反旋转的效果,在电机锁定情况下(电机绕组中存在电流,外部没有要求旋转的电脉冲),仍有保持力矩的输出。

The forward & reverse rotation is controlled by the polarity. There is still holding torque even while the motor rotor is being locked. There is still current flowing through the motor winding, but no pulse signal creating rotation from the outside controller.

4、低转速及高精度位置功能 Low Speed Feature and High Pricision Posion Control

通过对脉冲速度的控制,可直接得到极低的转速而不需要通过齿轮的过渡,从而避免了功率的损耗和角底位置的偏差。

Low frequency pulses being input, a stepping motor can operate at very low rotating speeds. This can be done without a speed reduction gearbox and thereby save power and maintain precision.

5、长寿命 Long Lifespan

不需要像普通的直流电动机通过电刷和换相,从而减少了摩擦,增加了寿命。

It decreases the friction and provides stepping motors with longer life. 


  • NEMA 8 标准混合式步进电机

    NEMA 8 标准混合式步进电机

    步进电机是将电脉冲信号转变为角位移或线位移的开环控制元件,通过控制施加在电机线圈上的电脉冲顺序、频率和数量,可以实现对步进电机的转向、速度和旋转角度的控制。
    品牌:运控
  • 型号 相数 机座尺寸
    (mm)
    电机长度
    (mm)
    静力矩
    (Nm)
    额定电流
    (A)
    20H020H-0404 20 0.15 0.4
    20H024H-0604 24 0.15 0.6
    20H028H-0434 28 0.16 0.43
    20H028H-0604 28 0.2 0.6
    20H038H-0464 38 0.31 0.46
    20H038H-1304 38 0.32 1.3
    20H045H-0604 45 0.41 0.6
    28H024H-0504 24 0.41 0.5
    28H028H-1004 28 0.67 1
    28H032H-0304 32 0.67 0.3
    28H032H-0954 32 0.74 0.95
    28H040H-0704 40 0.94 0.7
    28H045H-0504 45 1.1 0.5
    28H045H-0954 45 1 0.95
    28H045H-1914 45 1.1 1.91
    28H051H-0504 51 1.5 0.5
    35H020HM-0504 20 0.68 0.5
    35H024HM-0404 24 1.3 0.4
    35H033HM-0504 33 1.3 0.5
    35H036HM-0604 36 1.7 0.6
    35H036HM-1204 36 1.5 1.2
    35H040HM-0404 40 2.2 0.4
    35H028H-0504 28 1.3 0.5
    35H031H-0504 31 1.8 0.5
    35H033H-0404 33 2.4 0.4
    35H033H-0804 33 2.1 0.8
    35H033H-1254 33 1.8 1.25
    35H043H-0914 43 2.5 0.91
    35H054H-0904 54 4.5 0.9
    36H012HM-0304 12 1 0.45
    36H013HM-0504 13 0.34 0.3
    36H015HM-0304 15 0.54 0.5
    36H017HM-0434 17 0.58 0.3
    36H018HM-0434 18 0.64 0.425
    36H020HM-0454 20 0.66 0.425
    36H020HM-0804 20 1.1 0.45
    36H028HM-0404 28 0.92 0.8
    36H020H-0454 20 1.5 0.4
    39H023HM-0404 23 1.4 0.4
    39H031HM-0404 31 1.7 0.4
    39H044HM-1206 44 2.5 1.2
    39H020H-0404 20 0.8 0.4
    39H027H-0404 27 1.6 0.4
    39H031H-0404 31 2.2 0.4
    39H038H-0804 38 3.5 0.8
    39H044H-1004 44 4.6 1
    39H050H-1504 50 6.6 1.5
    39H032HF-0506 32 0.9 0.5
    42H033HM-0294 33 2.3 0.29
    42H033HM-1204 33 2.2 1.2
    42H039HM-0406 39 2.6 0.4
    42H039HM-1684 39 3.2 1.68
    42H045HM-0504 45 3.8 0.5
    42H045HM-1004 45 4 1
    42H047HM-0904 47 3.8 0.9
    42H047HM-1504 47 4.2 1.5
    42H053HM-0504 53 5 0.5
    42H053HM-1504 53 6.2 1.5
    42H021H-1004 21 1.6 1
    42H025H-1604 25 2.7 1.6
    42H029H-0604 29 2.6 0.6
    42H029H-2004 29 3.1 2
    42H033H-2004 33 3.1 2
    42H035H-0804 35 3.8 0.8
    42H039H-0804 39 4.1 0.8
    42H039H-1504 39 4.6 1.5
    42H045H-0604 45 5.4 0.6
    42H045H-2004 45 5.4 2
    42H047H-1304 47 6.3 1.3
    42H047H-2504 47 5.6 2.5
    42H053H-2004 53 6.8 2
    42H057H-1204 57 7.1 1.2
    42H057H-3004 57 7.8 3
    42H059H-0804 59 8.5 0.8
    42H060H-2004 60 9 2
    42H067H-2004 67 8.7 2
    57H041HM-2804 41 4.3 2.8
    57H055HM-1004 55 7 1
    57H055HM-2804 55 11.5 2.8
    57H065HM-3304 65 12.5 3.3
    57H076HM-1204 76 17.5 1.2
    57H076HM-2804 76 18 2.8
    57H039H-2004 39 5.2 2
    57H041H-2804 41 5.3 2.8
    57H045H-0564 45 9 0.56
    57H045H-1304 45 9 1.3
    57H051H-3004 51 9.4 3
    57H055H-0704 55 10.8 0.7
    57H055H-2004 55 13.5 2
    57H055H-2804 55 12.5 2.8
    57H060H-1004 60 12.7 1
    57H060H-2004 60 12.2 2
    57H063H-1504 63 17 1.5
    57H076H-0754 76 18.5 0.75
    57H076H-2004 76 19 2
    57H076H-4004 76 22 4
    57H080H-1504 80 19.5 1.5
    57H080H-5004 80 22.5 5
    57H100H-4004 100 27 4
    57H100H-5004 100 28 5
    57H041H-2004圆 41 6.6 2
    57H051H-1204圆 51 5.9 1.2
    57H051H-2804圆 51 6.5 2.8
    57H056H-1504圆 56 9.2 1.5
    57H076H-3004圆 76 16 3
    60H046HU-1503 46 6.5 1.5
    60H054HU-0503 54 11 0.5
    60H076HU-1003 76 19.5 1
    60H056H-1204 56 17 1.2
    60H065H-2606 65 16.5 2.6
    60H065H-5804 65 21 5.8
    60H076H-4004 76 25 4
    60H085H-4004 85 28.5 4
    60H100H-4004 100 38.5 4
    86H066H-2004 66 27 2
    86H066H-4004 66 35 4
    86H066H-6004 66 32 6
    86H080H-6004 80 45.5 6
    86H099H-5004 99 70 5
    86H113H-5604 113 79 5.6
    86H123H-6004 123 85 6
    86H127H-5604 127 88 5.6
    86H156H-6004 156 113 6
  • NEMA 8 标准混合式步进电机

    NEMA 8 标准混合式步进电机

    SM系列伺服电机具有多种绕组、编码器反馈、连接器选择。电机效率高,低转矩、转速波动。全系列拥有CE,RoHS以及UL认证。
    品牌:运控
  • 型号 相数 机座尺寸
    (mm)
    电机长度
    (mm)
    静力矩
    (Nm)
    额定电流
    (A)
    110SV04302-1000B-XXX 1000 6.4 26 52 3800
    110SV04302-1200B-XXX 1200 7.6 31 62 3800
    110SV04302-1500B-XXX 1500 9.6 39 78 3800
    110SV04302-2000B-XXX 2000 12.8 52 104 3800
    130SV04302-1300B-XXX 1300 8.2 33 66 3500
    130SV04302-2000B-XXX 2000 12.8 51 102 3500
    130SV04302-2600B-XXX 2600 16.6 66 132 3500
    130SV04302-3400B-XXX 3400 21.6 86 173 3500
    130SV04302-1500B-XXX 1500 9.6 39 78 3500
    130SV04302-3000B-XXX 3000 19.0 78 156 3500
    130SV04202-2300B-XXX 2300 22.0 50 100 2300
    130SV04202-3000B-XXX 3000 28.6 66 132 2300
    60SV11302-0200B-000 200 220 0.9 3000 2.7
    60SV11302-0200B-000 200 220 0.9 3000 2.7
    60SV02302-0200B 200 10.5 3000 1.92 4500
    60SV04302-0200B 200 6.3 3000 1.92 4500
    60SV04302-0400B 400 12.5 3000 3.81 4500
    80SV11302-0750B-000 750 220 5 3000 15.6
    80SV04302-0600B-001 600 17 3000 5.7 4500
    80SV04302-0750B-001 750 20 3000 7.2 4500
    40SV11302-0050B 50 0.7±10% 3000 0.48 6000
    40SV11302-0100B 100 0.7±10% 3000 0.96 4500
    40SV02302-0050B 50 3.6 3000 0.48 5500
    40SV02302-0100B 100 7.5 3000 0.96 6000
    40SV04302-0100B 100 3.5 3000 0.96 4500

    构建运控理念体系,分析企业发展环境,研判企业发展形势,提升企业活力与综合竞争优势

    以先进文化整合制度体系,结合管理体制、组织形式、队伍结构的新变化,推进制度创新,及时修订、完善各种规章制度,逐步建立起与发展历程相适应、相配套的管理体系 ,以健全完善的制度规范企业和职工的行为。

    copyright© 2019 常州市运控电子有限公司 All Rights Reservd.苏201230201